IR receive command + battery issue
Dear people who run or visit this forum, I have two questions - the first being more of a practical issue, while the second is purely theoretical. My practical problem concerns the programming of the...
View ArticleVR612 power supply problem
Hi I have a VR612 which is power supplied using a 5V 4A PSU plugged on the VRBS1. Everything is working fine when the arduino mega is connected to PC via USB. When no usb cable is plugged on the...
View ArticleLipo 2S 7.4V 2200mAh battery with VRBS1
Hi, Does anyone know if it is possible to directly connect a Lipo 2S 7.4V 2200mAh to VRBS1 shield? Thank you for your help 1 post - 1 participant Read full topic
View ArticleClik here to view.
Please HELP Allbot doesn't work at all
Can someone please help me? I bought an Allbot in november and I still haven’t figured out any of the problems that occur. For starters the allbot does some weird spasmic moves when I turn it on, then...
View ArticleClik here to view.
VR408 - problem with centering and moving
Hello, I have problem with VR408. At the beginning it was problem with centering pic1 - one leg in the bottom right. Then when I was trying example sketch, the robot was moving in this way:...
View ArticleALLBOT strange servo behavior
Hi, I just build my 4 legged ALLBOT. While building I have centered all the servo’s and followed the instructions step by step. I used the basic sketch from this website. But when I startup the robot...
View Article1G Servo protocol
Hi, I have recently bought a 3 part Allbot leg wich comes with 3 servos. I was pleased with the hardeware so I ordered another 5 to create a 6-leged robot. I am trying to contol the servos by a...
View ArticleHow to connect Arduino and VRSSM? (resolved)
Hello, I have just received an Allbot VR408 and I’m trying to build it but I have a strange problem. I wanted to center servos as indicated by manuals. But when I look at pictures showing how to...
View ArticleAllbot4 with mBlock3 to use scratch and avoid USB cable
Hello, I am a new user of allbot4, using scratch as indicated in https://manuals.velleman.eu/article.php?id=457 All works fine, using : VR408Scratch.ino ALLBOT Communicator program Import experimental...
View ArticleVR001 unusable on Honor 10, looking for a workaround (Resolved)
Hello, I have tried to use VR001 module but unfortunately I didn’t succeed to use it with my Honor View 10. Thus, as my phone has an “in-built” IR, I wanted to use an Androïd IR remote application. I...
View ArticleClik here to view.
Comandos Scratch para Allbot
Buenos días: He podido conectar mi Allbot sin problemas a Scratch, pero observo que no ha cargado todos los comandos en Programas/Más bloques, adjunto imagen Y por otro lado una vez que hiciera el...
View ArticleClik here to view.
VR408 to VR412 update
Hello everyone. I baught a VR408 pack and two extra 2 cervos legs, in order to build a VR412. I encounter a problem when to set up the part which is going to host the 3rd cervo of each leg : the grey...
View ArticleI cant make my robot do anything
Hi i need to make one of your robots for school. After messing with the examples sketches i finnaly found out how i can replace the libaries, but now i want it to walk i have seen that there is a walk...
View ArticleAllbot behaves differently when disconnecting USB
When I run a programm on the Allbot with the USB cable connected to the PC, it works ok. When I disconnect the USB cable, the Allbot starts behaving differently. The servos start moving in small...
View ArticleDon't work without Computer connection
Hello I have a ALLBOT VR408 with an Arduino Mega 2560. I took the Sketch from the Website and changed the Pin numbers. Also i changed the shunts to Mega. When im connected with the Computer, it works...
View ArticleClik here to view.
Vr204 & VRSSM issues
Hi. the following prog works as expected when a servo is attached to the UNO directly. #include <Servo.h> #include <ALLBOT.h> ALLBOT BOT(1); // Number of motors enum MotorName { // Giving...
View ArticleAllbot VR204 not moving as intended
Hi I have been trying to get control over the movement of my 2 legged robot. I did the assembly and centering of servos as per instructions.Whenever i turn on;all the servos seem to move to a...
View ArticleNo images on ALLBOT building instructions manual
Hello, I have an ALLBOT with 4 legs and 8 servos that is partly built. I want to continue building it but when I check the manual for it I couldnt find any images showing the process. There is only...
View ArticleI think my ALLBOT servos are dysfunctional
Hello there, I have just assembled my ALLBOT VR408 after a long time of it sitting idle and I think a couple of the servos are dysfunctional. When I move them they don’t make the classic mechanical...
View ArticleIr-transmitter on vr204
Hello all, I just finished my 2-leg allbot, and random it works fine. However when I try to get the IR-transmitter working the blue licht never lihts up, only a small led at its side is flickering....
View Article